The solution to obtaining product samples from a wide range of production processes

The Mucon Oyster Sample valve is designed to quickly and easily extract powder samples from Reactors, Dryers and Conveying Systems with minimal disruption to the production process. The sampling valve is available either in an Intrusive or Non-Intrusive format for manual or pneumatic operation. The standard Oyster Sample Valve has a non-intrusive piston with a sample port at an angle to the main body into which the sample material falls under gravity when the valve is opened.The sample port is equipped with a purging valve, which can be used to equalize pressure / vacuum to the outside.The Sample Valve itself is attached to the vessel by means of a Tri-Clamp or Mounting Flange. Mounting arrangements can be customized if required.

Construction:

• 316L Stainless steel contact parts
• Non-contact parts are produced in 304L or 316L if preferred
• Piston – PTFE
• Tri-Clover Gasket
• Bronze Drive Bush
• FEP or Kaflon O Rings

Features:

• The standard Sample Valve is DN 50 with a 40mm sample port. Other sizes can be produced to suit customer applications.
• A choice of contact parts to suit abrasive material applications
• Manual actuation via hand wheel as standard – Automatic operation can also be provided
• Operating Pressure -1 to 3.5 barg
• Operating Temperature 30°C to 80°C
• Design Pressure is 3 bar
• A selection of Valve Mounting options – Tri-Clamp, PN6 Flange and PN10 Flange. • Customized mounting to suit customer requirements is also catered